• -2.50 JOD
HC-12 Wireless Serial Module
search
  • HC-12 Wireless Serial Module
  • HC-12 Wireless Serial Module

HC-12 Wireless Serial Module

14.00 JOD
11.50 JOD Save 2.50 JOD
  1. Operating Frequency Range: 433.4 - 473.0MHz
  2. Transmit Power Max: 20dBm
  3. Power Supply Voltage: DC 3.2V ~5.5V
  4. Long Communication Distance: About 1000 meters at the default setting
Quantity

Description

HC-12 wireless RF UART communication module is a new generation of multi-channel embedded wireless data transmission module. The Radio frequency of 433.4 - 473.0MHz, can be setting a communication channel, step is 400kHz, a total of 100 channels. The module maximum transmit power is 100mW (20dBm), and -116dBm receiver sensitivity air of the 5000bps baud rate, communication distance about 500 meters.

The module adopts a stamped hole encapsulation method, which can be welded. The module size is 27.4mm*13.2mm *4mm (including antenna seat, not including the spring antenna), which is convenient for the customer to be embedded in the application system. The module has a PCB antenna seat ANT1, users can use the coaxial cable, the use of 433MHz band external antenna.

The module also has antenna welding hole ANT2, convenient user welded spring antenna. The user can choose one kind of antenna according to the request. The module contains MCU, users do not need to program in addition, just send and receive UART data. The module uses a variety of UART transmission mode, the user can choose according to the requirements of the use of AT command. The four UART modes of FU1, FU2, FU3, FU4, the average operating current is 3.6mA, 80μA, 16mA and 16mA, the maximum operating current is 100mA (full power transmit state) HC12 Module is based on the SI4463 EZRadioPro family chip by SiLabs. This module offers a wireless data transmission and reception range of approximately 1 km in the open air. It’s a low power radio chip that is ultra-easy to use.

This module has an onboard STM8S003F3P6 MCU which is communicating with the SI4463 so that the user can communicate with the HC12 module using a simple TTL 2 wire serial interface (RX, TX, GND).


Specifications

  • Model: HC-12
  • Communication Interface: UART
  • Operating voltage: 3.2 ~ 5.5V
  • Transmission power: 20dBm (maximum)
  • Reference distance: 1000 meter
  • Working frequency band: 433.4 ~ 473.0MHz
  • Antenna interface: Spring Antenna/Antenna Socket
  • Working Humidity: 10% ~ 90%
  • Working temperature: -25℃ ~ +75o
  • Length (mm): 27.5
  • Width (mm): 13.5
  • Height (mm): 4
  • Weight (gm): 2
30 Items