AC/DC Motor Reversing Controller

Features:

• Dual power supply (two power supplies cannot be powered at the same time): Power supply 1, DC 6.5-25V; Power supply 2, DC 5V   
• Working current: (Normal Mode) standby current 41mA, working current 83mA; (Energy-Saving mode) Standby current 7mA, working current 44mA.   
• There are three input control port: forward control(FWD), reverse control(), and stop control(STOP).   
• Two input trigger modes, Low-Pulse trigger mode, Low-Level trigger mode   
• Delay time: 0.1-999.9 seconds, 1-9999 seconds, 1-9999 minutes.   
• Cycle times: no cycle, 2-99 cycles, always cycle.   
• Three indicators: forward indicator(F LED), reverse indicator(R LED), stop indicator(S LED).   
• Relay load current, recommended less than 5A.
• This is a multi-function DC/AC motor forward and reverse controller with multiple control modes. Many control functions can be derived through reasonable settings.
  

Port:      
DC 5.5MM female : Power supply 1, DC 5V power supply. 
VIN: Power 2 positive, DC 6.5-25V power supply 
GND: Power supply 2 negative 
FWD: Forward input control (partial Function-Mode is invalid) 
: Reverse input control (partial Function-Mode is invalid) 
STOP : Stop input control (partial Function-Mode is invalid) 
M+: Motor positive  
M-: Motor negative 
P+: Positive terminal for motor power supply
P-: negative terminal for motor power supply

Specification:

Power supply: DC 6.5-25V, DC 5V

Working current: 83mA

Standby current: 41mA

Relay load current: <5A

Delay time: 0.1-999.9 seconds, 1-9999 seconds, 1-9999 minutes

Size: 8*5cm/3.2*2in
Weight: Approx. 51g/1.8oz

Trigger mode: 

1 low pulse trigger (falling edge trigger)

2 low level trigger (rising edge trigger)

Timer: 

T1: Forward timer

T2: Reverse timer

T3: Stop timer

Time unit : 0.1 second, 1 second, 1 minute